Old boats may have lots of rotting wood What is Boating Accessories & Equipment? . Check the deck floor, seat bases and especially the transom for sagging, rot or decay. Strip old wood out of the boat and replace it with marine-grade plywood or a modern cored composite. Go to YouTube and find at least three step-by-step DIY videos that say the same thing. These guys might not be “experts,” but they at least have experience.
Whether you're looking to purchase a new boat or you're just looking to restore your existing vessel, there are several different ways to do it. There are some basic items that you'll need, such as a Boat Restoration Kit and some paints, but you'll also need some ideas and projects that you can work on.
How To Restore A Boat Interior: Whether you're restoring a boat interior for the first time or have been doing it for years, there are some things to keep in mind. Not only should you be careful not to interfere with your boat's use, but you should also be sure that the work is done right.
Existing business with real estate - Thirty plus years of marine business history in South Lake Tahoe; operating in this location since 2009 when the owner designed this state of the art property from the ground up to meet specific needs for a marine repair shop with many applicable features including a 4,000 warehouse including 800 sq. ft. of office with a 2,500 sq. ft.
a HDPE sheet designed for the marine environment, it’s a widely popular marine material because it will never rot or delaminate, and is virtually maintenance free. It’s very easy to work with using common woodworking tools, but cannot be glued or bent. Perfect for doors, hatches, storage units, rod holders and tackle boxes.
a polyurethane foam filled with strand and woven fiberglass making it as structurally sound as plywood, but weighs about 30-40% less and will never rot or absorb water. Although it will not absorb water or rot, in most cases we recommend covering the material as it is not UV stable and due to the fiberglass composition can be rough on skin. Ideal for decking, bulkheads, and transom replacements.
a lighter weight version of King Starboard that’s less expensive but not as rigid. The reason for it being lighter and less expensive is that when extruded, a blowing agent is added. The tradeoff for this is that it has a cellular edge that dirties easily so it’s not ideal for visible applications. That said, it works well for areas not visible like tackle box shells, upholstery substrates and backing plates.
an easy to work with, less expensive, alternative to other countertop materials. It is available in many attractive colors and designs. That said, it is not as durable as natural stone or granite and has lower heat limitations, but it’s perfect for countertops, vanities and wet bars.
This Business has been profitable from inception over 30 years ago and generates an average of $8 mm in annual revenue. 2022 is on track to exceed 2021 with over $12mm in revenue. Everything about this business has been built and run to the highest professional standards from trademarked logos to books and record keeping, everything is in place for success and could be expanded to other markets. The property location has the potential for tremendous additional revenue by adding the sale of other automotive-related lines. Direct targeted internet advertising generates more income as needed. The more they advertise, the wider their customer base is. It is an easy, direct, and low overhead form of advertising that creates the most revenue. Experienced knowledgeable people staff the business as compared to their competition. Owners are motivated and looking to retire and will support the transition as needed.
Set the heat gun to a low setting and peel off the old decals and numbers. Use adhesive remover to get rid of any residue.
Overfill gouges so the filler mounds slightly. You’ll sand it flush after it cures. Curing can take one to two hours—depending on humidity levels. So test it by touch. If it’s sticky, it’s not fully cured. Once it’s fully hardened, sand it with 80-grit sandpaper (Photo 5).
The most important thing to remember is that a boat should be restored as close to its original appearance as possible. This means that you shouldn't use any natural fibers. They will eventually rot.
This profitable and award-winning sailing school and club, based in the Puget Sound area, provides education, sailboat rentals, and local and international excursions.
Now you’re ready to mix a fresh batch of gel coat (without the chop) and spray the scratched and patched areas (Photos 6 and 7). Chris recommends using a disposable spray gun and paper cups. Unthinned gel coat won’t go through the sprayer. Add the recommended amount of reducer (read label directions) and hardener and mix the ingredients. Spray the patched areas with short bursts.
Well established Sea Tow Franchise located in the Hampton Roads area of Virginia. The business financials reflect a very well operated business. Included are well maintained vessels and equipment and transferable dockage leases. Owner willing to stay on for a negotiated time.
They have mechanic reverse. Getting one from the dealer will cost you more, and you will have to put a deposit and wait at least 6 months to receive them, because of the huge backlog with Yamaha after Covid. - Two brand new 2021 Rocket double trailers. Made of aluminum, so they do not rust. - All the necessary equipment, which includes, but not limited to, 8 adult unisex CGA life vests, 2 additional for kids, 4 whistles, 4 fire extinguishers, 4 marine ropes and a floating one in case you need to tow a jet ski using another one, a water hose to flush them, covers for the skis, 2 dollies to store them out of the trailer if needed, business cards, 4 polo shirts with the logo stamped, etc.. - An automated eCommerce website that to build one like this with any Software Development company will cost you at least $20K. It has the ability to capture online orders, calculate taxes, add security deposit and more.
This marine repair business services for authorized service only, servicing both diesel & gas motors. Great value-add potential by opening to other marine service other than just authorized service. Significant parts counter sales with significant mark-up. Customers bring their boats from out of state. Seller established this business 29 years ago and wants to retire. Seller owns the real estate and will give a long term lease to new buyer. This sale is subject to an employment contract with the lead technician, who holds the certifications, and the office manager / bookkeeper.
